Mustang Exhaust - From The Header To The Tailpipe

In terms of popularity, upgrading the exhaust of a Mustang is second only to replacing the wheels. It doesn't matter if you are changing out the mid-pipes or replacing the whole system --when you own a Mustang, you want the exhaust system to last and sound good. To get these results, you will need to improve and/or replace the components of your exhaust. What are the different components of the mustang exhaust?

There is more to the mustang exhaust system than just pieces of metal bolted together. Your mustang exhaust performs many functions, the most important ones are the following. They move the hot exhaust gases coming from your engine out of the car. They limit the noise output and reduce exhaust emissions. The faster you are able increase the air flow through the engine the better overall performance you will have and the exhaust is integral this.

How are these things done by the exhaust system? It is accomplished by the pushing of the gases, beginning in the engine and continuing through to the pipes and mufflers, and ending by going out of the car. The mustang exhaust system has three main parts. It doesn't matter what year your mustang was built, they all have the same set-up. It is strongly recommended that both of the headers be upgraded and a cat-back exhaust be used. Your performance will definitely improve. As a bonus, you may get better sound and fuel efficiency.

We begin with the manifolds. This piece is connected to the exhaust ports, and joins the waste gases from all of the cylinders into a single location. Some people will refer to this piece as the "mustang headers". Despite the fact the names are both used, they actually refer to two slightly different things. Manifolds force the gases into a single chamber at maximum speed and pressure. The headers consist of tubes which allow the gases to flow at their own pace, like water through a drain.

The next part is the mid-pipe, which is a component of every mustang exhaust system. This is the place where the gases arrive after they leave the manifold, with the main purpose being to equalize the exhaust pulses. These are the exhaust bursts from the engine to the pipe, which creates a more efficient working of the system, and allow the engine to produce greater power.

The third component is known as the mustang catback, which is bolted on to the back of the catalytic converters. The entire assembly is made up of the mufflers and the tailpipes, this is the final place that the vicious gases created by the engine come to. There are many products available aftermarket for performance upgrading of headers, exhaust and intake, the best source would be to click the links that you find in this article or resource box.